Faculty

Burak Ozdoganlar is currently Ver Planck endowed chair professor of Mechanical Engineering and the associate director of the Engineering Research Accelerator. He also holds courtesy faculty positions in Biomedical Engineering and Materials Science and Engineering. Ozdoganlar received two M.S. degrees from The Ohio State University in 1993 and 1995, and his Ph.D. degree in mechanical engineering from the University of Michigan in 1999. Before joining Carnegie Mellon in 2004, he held positions at the University of Illinois at Urbana-Champaign as a postdoctoral research associate, and at the Sandia National Laboratories as a senior member of technical staff.

His primary research interests include modeling and experimentation of manufacturing processes and systems, specializing in multi-scale (macro/micro/nano-) manufacturing and its applications (including medical and biomedical device fabrication); precision engineering; modeling and experimental approaches in structural dynamics; and modal testing and analysis.

He has co-authored more than 90 archival journal articles and more than 110 conference articles. He previously served as an associate technical editor for ASME J. Manufacturing Science and Engineering, and for the Society of Manufacturing Engineers (SME) J. Manufacturing Processes. Since 2008, he has been a member of the Scientific Committee of North American Manufacturing Research Institution of SEM.

Ozdoganlar has also been active in professional societies: he is a Fellow of ASME, a founder and past-president (2011-2012) of the International Institution of Micro Manufacturing (I2M2), and he is a former chair of the ASME-MED manufacturing equipment technical committee. He was also an interim CTO and then the Chief Scientist of ARM (Advanced Robotics for Manufacturing Institute), a ManufacturingUSA institute. He is a member of the Phi Kappa Phi and Sigma Xi honor societies, SME/NAMRI, ASME, and ASEE. His recent awards and recognitions include the 2011 ASME Blackall Machine Tool and Gage Award; the SME 2007 Outstanding Young Manufacturing Engineer award; the 2006 NSF/CAREER award; the 2008 NAMRI/SME Outstanding Paper award; and the Russell V. Trader Career Faculty Fellowship at CMU (2009-2011).

Office
343 Scaife Hall
Phone
412.268.9890
Fax
412.268.3348
Email
ozdoganlar@cmu.edu
Google Scholar
Burak Ozdoganlar

Education

1999 Ph.D., Mechanical Engineering, University of Michigan, Ann Arbor

1995 MS, Mechanical Engineering, Ohio State University

1993 MS, Aeronautical and Astronautical Engineering, Ohio State University

1991 BS, Aeronautical Engineering, Istanbul Technical University

Media mentions


CMU Engineering

Carnegie Mellon lands ARPA-H award for implantable bioelectric medicine project

A CMU-led project team secured an award of up to $42M from ARPA-H to accelerate the development of implantable bioelectronic devices that deliver patient-specific therapy and monitor disease status.

CMU Engineering

Understanding the 3D ice-printing process to create micro-scale structures

Researchers at Carnegie Mellon University develop numerical models that enable precise control of the 3D ice printing process for biomedical and manufacturing applications.

Interesting Engineering

LeDuc, Ozdoganlar, and Yang featured in Interesting Engineering

MechE’s Philip LeDuc, Burak Ozdoganlar, and Feimo Yang have developed a new tissue engineering technique that may alleviate the organ transplantation crisis. The work was featured in Interesting Engineering.

CMU Engineering

From 2D to 3D: MXene’s path to revolutionizing energy storage and more

For the first time, researchers have arranged 2D MXene nanosheets into a 3D structure without compromising performance—a technology with the potential to have a tremendous impact on energy storage devices for applications like electric vehicles.

CMU Engineering

3D micro-ice printing for medical applications

Carnegie Mellon researchers receive funding from the Manufacturing Futures Institute to continue work on 3D micro-ice printing for medical applications.

CMU Engineering

Scalable manufacturing unlocks potential of soft electronics

New research from Burak Ozdoganlar, Carmel Majidi, and Kadri Burga Ozutemiz seeks to develop a scalable manufacturing method that combines the best of quality and quantity on a miniature scale, with the potential to reimagine how wearable medical devices are made.

Scott Institute

Three CMU energy projects receive Scott Institute Seed Grants

Three CMU-led energy projects have been awarded seed grants from the Wilton E. Scott Institute for Energy Innovation.

Mechanical Engineering

Ozdoganlar inducted into AIMBE College of Fellows

Burak Ozdoganlar inducted into the 2023 class of the AIMBE College of Fellows

Additive Manufacturing Media

Ozdoglanar and LeDuc speak to Additive Manufacturing Media

The video of a new 3D ice printing method developed by Carnegie Mellon engineers is magical according to Additive Manufacturing Media. Read about how mechanical engineering faculty Burak Ozdoganlar and Philip LeDuc and Ph.D. student Akash Garg are printing sacrificial structures that are as small as blood vessels.

CMU Engineering

Microneedles unlock curcumin’s therapeutic potential

Researchers engineer a hybrid system that stabilizes curcumin to target skin diseases.

CMU Engineering

Scaling up the production of liquid metal circuits

At Carnegie Mellon, mechanical engineering researchers have developed a new scalable and reproducible manufacturing technique that could accelerate the mainstream adoption and commercialization of soft and stretchable electronics.

CMU Engineering

3D printing ice

3D printed ice isn’t as magical as in the movie Frozen, but it has wonderful potential for biomedical engineering and advanced manufacturing.